Suzuki Burgman 400 - Service manual > Exhaust System Inspection
Inspect the exhaust pipe connection and muffler connection for exhaust gas leakage and mounting condition. If any defect is found, replace the exhaust pipe or muffler with a new one.
Check the exhaust pipe bolts, exhaust pipe connecting bolt and muffler mounting bolts are tightened to their specified torque.
Tightening torque
Exhaust pipe bolt (a): 23 N*m (2.3 kgf-m, 16.5 lb-ft)
Exhaust pipe connecting bolt (b): 23 N*m (2.3 kgf-m, 16.5 lb-ft)
Muffler mounting bolt (c): 23 N*m (2.3 kgf-m, 16.5 lb-ft)
HO2 Sensor Inspection
Refer to "HO2 Sensor Inspection".
Specifications
Tightening Torque Specifications
NOTE The specified tightening torque is also described in the following.
Reference: For the tightening torque of fastener not specified in this section, refer to "Tightening Torque Specifications".
Special Tools and Equipment
Recommended Service Material
NOTE Required service material is also described in the following.
See also:
Suzuki Burgman 400 - Service manual > Exhaust System Components
Exhaust pipe gasket Muffler connector HO2 sensor Exhaust pipe bolt Exhaust pipe connecting bolt Muffler mounting bolt : 48 N*m (4.8 kgf-m, 34.5 lb-ft) : 23 N*m (2.3 kgf-m, 16.5 lb-ft) : 23 N*m (2.3 kgf-m, 16.5 lb-ft) : 23 N*m (2.3 kgf-m, 16.5 lb-ft)
Suzuki Burgman 400 - Service manual > Suspension
Precautions Precautions for Suspension Refer to "General Precautions". ! WARNING All suspensions, bolts and nuts are an important part in that it could affect the performance of vital parts. They must be tightened to the specified torque periodically and if the suspension effect is lost, replace it with a new one.
