Vespa GTS Super 300 ie - Service manual > Braking System
See also:
Vespa GTS Super 300 ie - Service manual > Shock absorbers
Removal Proceed as follows: place the vehicle on its centre stand; remove the luggage rack lift the engine a little with a jack so as to free the two shock absorbers; remove the muffler assembly; undo the shock absorber spring assembly clamping screw from the support fixed to the engine on the one side and from that fixed to the muffler on the other; unscrew the two upper nuts (one on each side) fixing the shock absorber spring assembly to the frame and remove the shock absorbers.
Vespa GTS Super 300 ie - Service manual > Rear/Front brake calliper
Rear brake calliper Removal Remove the rear wheel. Remove the pad retention pin snap ring. Using a pin partially remove the brake pad retention pin. Remove the screws fixing the brake calliper to the crankcase then remove the brake calliper complete with pipe. Complete the extraction of the pad retention pin, the spring and the pads.
